The floors in our homes often have to bear the weight of all the daily activities and tasks we do at home, which causes significant wear and tear and dirt. That's why it's very important to take care of them and keep them in good condition. Cleaning a ceramic floor is a fairly simple task, but you'll need to do it often to keep it shiny and looking like new.
Have you noticed that your tiles don't look like they did on the first day? In this new Brico Depôt post we are going to offer you an easy, efficient and economical solution to keep them in perfect condition, even over time. We will make cleaning your ceramic floor no longer a problem for you with the products and habits that we are going to recommend.
5 essential steps for cleaning a ceramic floor
By following these 5 steps, you can clean your ceramic floor in an absolutely effective way. Let's get to work!
Eliminate the remains of dirt
Any dirty floor contains a large amount of dust particles that must be removed before starting to mop. To do this, a good sweep or vacuum is very important. This way, the surface will be free of the largest volume of dirt and will be ready to apply cleaning products that ensure the cleanliness of your ceramic floor.
Scrub every corner of the room
Take your regular mop bucket and dilute a specific product , such as Step 1 Cement Remover , to clean this type of floor in a large amount of water. To remove the remains of the laying material, remember not to use any abrasive product, with an acidic, alkaline, hydrochloric acid base, or scouring pads.
If you don't have them, you can also use neutral soap , white vinegar , bleach or baking soda , as they will give you excellent results.
Make special incision in the embedded dirt
It is possible that dirt that has been accumulated for a longer period of time has produced some encrustation, so you should make sure to give those areas an extra, more specific wipe to remove them. This way, the cleaning of your ceramic floor will be completely uniform and will be much closer to the results you are looking for.
Rinse the surface with water
A good final rinse with water and the help of a mop will help you to remove the last traces of dirt and will make your floor look much more vibrant and renewed. It is a step that is as simple as it is necessary. Also, if there is any residue of the cleaning product left, it is the best way to remove it.
Extra step: Give it some shine
To make the surface shine as naturally as possible, we recommend waiting for it to dry completely and using a mop or dry cloth for a final wipe. After completing these steps, you will see how your floor shows off its colours with greater intensity and brings a great freshness to the environment.
Cleaning tips for ceramic floors
As you can see, although there are certain products designed specifically for cleaning ceramic floors, there are also other more conventional compounds that offer excellent results . And not only for surfaces, but also for other types of household items that require deep cleaning and even disinfection.
Using vinegar, bleach and baking soda
Among the main cleaning products used at home, vinegar, bleach and baking soda have always been highly effective. Not only do they have antiviral and antibacterial properties that prevent the proliferation of pathogens, but they also provide that shiny touch you are looking for if you follow our steps in an orderly manner.
Removes grease stains with ease
Grease buildup is often a common problem on floors in the home, and sweeping or vacuuming and then mopping may not be enough to remove all stains. To do this, we recommend that you always have a grease remover on hand that is suitable for different surfaces.
Removes dirt accumulated between the tiles
On the other hand, it is quite likely that the dirt accumulated between the joints of the tiles has not disappeared completely, since it is usually an area that is difficult to access for vacuum cleaners, brooms and mops. To do this, we suggest using a soft-bristled brush to do a much more specific and precise job. Without a doubt, it will give you the result you are looking for when cleaning your ceramic floor.
How to avoid footprints on porcelain floors?
Many times, we carelessly walk through certain rooms in our homes with our street shoes still on and introduce a large amount of dirt , which accumulates on the soles of our shoes.
If you have left a fingerprint, the best solution to prevent the mark from remaining for a long time is to clean it immediately with one of the products we have recommended. This way, the dirt will not dry and will not be embedded in the surface.
Quick cleaning of your ceramic floor will always be a really effective solution to keep the room in perfect condition, both for your health and aesthetically. Don't forget that, although we always want our floors to look shiny and as if we had just bought them, preventing possible illnesses caused by uncleanliness is also essential.
Buy your flooring and cleaning materials at Brico Depôt
Has this new Brico Depôt post been useful for you to clean ceramic floors efficiently? By following our advice, you will always be able to keep your surfaces protected and looking like new.
In addition, if you need to make a purchase, whether it be coverings or products, in our online store you have a large number of options available. Everything you have in mind for the care of your home is in our online catalogue. We are sure to have the solution you are looking for.
0 Comments